EUNIFLOW 165M is a high efficiency liquid superplasticizer designed to improve the slump retaining properties of high workability ready mixed concrete. It is also specifically beneficial in yielding excellent workability retaining properties, when used in conjunction with EUNICOR DCIS Corrosion Inhibitor to enable large or diicult pours to be made. EUNIFLOW 165M is based on modified synthetic carboxylate polymers and is manufactured under controlled conditions to give a consistent product. EUNIFLOW 165M conforms to the requirements of ASTM C-494, Type A, F and G and to BS EN 934-2.
EUNIFLOW 165M is supplied ready for use. When producing high workability concrete it should be added in its supplied form to the batching water prior to the addition of the cementitious components. Addition of any further chemical admixtures should be undertaken separately. Aer the addition of the cement, a further mixing cycle of at least 2 minutes is recommended to enable EUNIFLOW 165M to efficiently disperse the mix components.
• High workability concrete can be obtained by incorporating EUNIFLOW 165M into a concrete mix designed for a 50mm slump.
• EUNIFLOW 165M can also be used to eect high range water reductions, resulting in increased compressive strength and durability.
• Providing suitable mix designs are employed, high workability concrete based on EUNIFLOW 165M will remain cohesive.
• EUNIFLOW 165M is dosage efficient.
• EUNIFLOW 165M can be used as a pumpablity enhancer with a combined plasticizing effect.
