EURIPEL 75ME is an innovative liquid admixture that significantly reduces both the permeability and the drying shrinkage of concrete. This enhanced concrete performance is achieved by:
• Reduced water absorption and penetration.
• A significant reduction in drying shrinkage, which produces fewer and thinner cracks.
• A low w/c ratio, which reduces capillary paths in the cured concrete.
• High slump, workable concrete mix for ease of placement.
• Enhanced compressive and tensile strengths at all ages.
When EURIPEL 75ME is used with EUNIFLOW high performance concrete admixtures, highly effective, integrally waterproof concrete is achieved.
With cements: EURIPEL 75ME can be used with all types of Portland Cements, including sulphate resisting cements. It is compatible with concrete containing fly ash, ground granulated blast furnace slag (GGBS) and silica fumes. For other cement types consult European Concrete Additives. With Other Admixtures: As with all concrete admixtures, EURIPEL 75ME should not be premixed with other admixtures or chemicals. The product is engineered to be used with European Concrete Additives EUNIFLOW superplasticisers, but must be dosed separately. Physical properties of the concrete may be adversely aected if EURIPEL 75ME is used with other admixtures and chemicals.
• Reduces drying shrinkage and permeability of concrete.
• Improved workability resulting in easier, more complete compaction can be used in all types of concrete, with all types of cementitious binders.
• Concentrated, liquid formulation for the Middle East conditions – considerably less than other liquid systems and more easily dispersed than a powder.
• No expansive agents
• Improves early strength.
• Can be combined with European Concrete Additives membranes or cavity drain systems for enhanced protection in critical applications.
