EUNIFLOW 585 is a high performance superplasticising admixture that has been developed to enhance early age strength development of concrete. It is an extremely versatile and flexible product, and is effective over a wide range of cement contents and types. It can be employed to effect large water reductions or impart extreme workability to concrete, enabling large or difficult pours to be made, whilst accelerating early strength development. EUNIFLOW 585 is formulated from carefully selected raw materials, and is manufactured under controlled conditions to give a consistent product.
EUNIFLOW 585 is supplied ready for use. It should be added in its supplied form to concrete mixes preferably at the same time as the batching water, during the mixing cycle following the addition of aggregates and cement. EUNIFLOW 585 can also be added in its supplied form to a normal concrete mix a few minutes before a pour is to be made. In this situation a further mixing cycle of at least 2 minutes would be required to enable EUNIFLOW 585 to adequately disperse throughout the mix. EUNIFLOW 585 should not be added directly to the cement.
• Mixes remain cohesive, when using EUNIFLOW 585, for high workability concrete, providing suitable mix designs are employed.
• Can be utilized in S.C.C. mix designs to eect improvements in early strength development
• EUNIFLOW 585 is suitable for use in high workability concretes where accelerated setting and early age strength enhancement is required.
• Improves impermeability and durability of concrete.
• Particularly useful in precast concrete manufacture where early strength gains are required to optimize mould turn round times.
• Effective over a large ambient temperature range and can be utilized to effect reductions in form work stripping times.
• Classified as cold admixture and very good for using in hot weather concrete application.
